1/4in x 100ft: covers approximately 16 square feet of glass, or a 4' x 4' window
Reflective glass creates the illusion of additional habitat a bird thinks it can reach. These white square markers stand out against the green and brown shades of the habitat. e.g., house window.
How to Use
Install on a clean window
Place the two included measuring tapes on opposite window edges, and run the roll of Feather Friendly® tape from side to side, spacing 2" apart, and press lightly into place.
Go over the markers with the included squeegee
Slowly peel of the tape by pulling at a 45 degree angle against the glass
Roll of Feather Friendly® small-format DIY marker tape, two paper measuring tapes, one squeegee, one installation instruction sheet, and one bird-safe sticker.
Each roll contains ¼” markers spaced 2” apart. The roll is 100 ft long and can treat approximately 16 sq ft of glass (e.g., a 4 ft x 4 ft window, patio door or glass panel).
Storage & Pre-install Instructions:
For windows and patio doors, apply markers to the outer surface (the exterior side). The markers will be less effective if not applied to the correct surface.
Do not apply markers when the outside temperature is below 10°C (50°F).
Install the markers within 1 month of purchase for optimal results.
Store markers out of direct sunlight and away from extreme heat and humidity.